Technical Program

Filter by Sessions

All

Training Sessions

General Sessions

Welcome & Keynote Sessions

Speaker Sessions

Poster Sessions

Networking & Breaks

DOWNLOAD PROGRAMME

Ancillary Program
29 October 2023, Sunday

8:00

– 11:30

DAMMAM DOME FIELD TRIP
Capacity: Max 50 persons

8:00
-11:30

DAMMAM DOME FIELD TRIP
Capacity: Max 50 persons

8:00

– 11:30

DHAHRAN TECHNO VALLEY FIELD TRIP
Capacity: Max 60 persons

8:00
-11:30

DHAHRAN TECHNO VALLEY FIELD TRIP
Capacity: Max 60 persons

8:00

– 11:30

SHORT COURSE AT KING FAHD UNIVERSITY OF PETROLEUM & MINERALS (KFUPM)

8:00
-11:30

SHORT COURSE AT KING FAHD UNIVERSITY OF PETROLEUM & MINERALS (KFUPM)

13:00

– 15:00

CAMPUS TOUR – MORE INFORMATION TO FOLLOW SOON

13:00
-15:00

CAMPUS TOUR – MORE INFORMATION TO FOLLOW SOON

DAY 1
30 October 2023, Monday

8:00

– 9:00

ONSITE REGISTRATION

8:00
-9:00

ONSITE REGISTRATION

9:00

– 9:05

HOTEL SAFETY BRIEFING

9:00
-9:05

HOTEL SAFETY BRIEFING

9:05

– 9:15

COMMITTEE CHAIRS WELCOME

9:05
-9:15

COMMITTEE CHAIRS WELCOME

9:15

– 9:30

OPENING SPEAKER

9:15
-9:30

OPENING SPEAKER

9:30

– 10:30

UNDERGROUND RESOURCES FOR A SUSTAINABLE FUTURE
Speaker : Priscilla P. Nelson, Colorado Schook of Mines

9:30
-10:30

UNDERGROUND RESOURCES FOR A SUSTAINABLE FUTURE
Speaker : Priscilla P. Nelson, Colorado Schook of Mines

10:30

– 11:10

MODERATED DISCUSSION

10:30
-11:10

MODERATED DISCUSSION

11:10

– 11:25

COFFEE BREAK - 15 MIN

11:10
-11:25

COFFEE BREAK - 15 MIN

11:25

– 12:25

SUBSURFACE ENERGY STORAGE GEOMECHANICS
Speaker : Maurice B. Dusseault, University of Waterloo

11:25
-12:25

SUBSURFACE ENERGY STORAGE GEOMECHANICS
Speaker : Maurice B. Dusseault, University of Waterloo

12:25

– 13:05

MODERATED DISCUSSION

12:25
-13:05

MODERATED DISCUSSION

13:05

– 14:05

LUNCH - 1 HR

13:05
-14:05

LUNCH - 1 HR

14:05

– 15:05

GEOTHERMAL ENERGY – AN OPPORTUNITY
Speaker : John McLennan, University of Utah

14:05
-15:05

GEOTHERMAL ENERGY – AN OPPORTUNITY
Speaker : John McLennan, University of Utah

15:05

– 15:45

MODERATED DISCUSSION

15:05
-15:45

MODERATED DISCUSSION

15:45

– 16:00

COFFEE BREAK - 15 MIN

15:45
-16:00

COFFEE BREAK - 15 MIN

16:00

– 16:25

VIRTUAL KEYNOTE :
THE GEOMECHANICAL CHALLENGES OF MASSIVE SCALE CO2 SEQUESTRATION
Speaker : Mark Zoback

16:00
-16:25

VIRTUAL KEYNOTE :
THE GEOMECHANICAL CHALLENGES OF MASSIVE SCALE CO2 SEQUESTRATION
Speaker : Mark Zoback

16:25

– 16:40

MODERATED DISCUSSION

16:25
-16:40

MODERATED DISCUSSION

18:00

– 20:00

GALA DINNER, SPONSORED BY EXPLORATION DEPARTMENT, SAUDI ARAMCO WITH SPONSOR RECOGNITION

18:00
-20:00

GALA DINNER, SPONSORED BY EXPLORATION DEPARTMENT, SAUDI ARAMCO WITH SPONSOR RECOGNITION

DAY 2
31 October 2023, Tuesday

7:30

– 8:30

ONSITE REGISTRATION

7:30
-8:30

ONSITE REGISTRATION

8:30

– 8:50

OPENING SPEAKER

8:30
-8:50

OPENING SPEAKER

8:50

– 10:05

9 societies – 5 min each (45 min)
30 min moderated discussion (total 1h 15 min)

8:50
-10:05

9 societies – 5 min each (45 min)
30 min moderated discussion (total 1h 15 min)

10:05

– 10:15

GROUP PHOTO

10:05
-10:15

GROUP PHOTO

10:15

– 10:30

COFFEE BREAK - 15 MIN

10:15
-10:30

COFFEE BREAK - 15 MIN

10:30

– 11:50

STREAM 1

SESSION 1:
CO2 SEQUESTRATION & UTILIZATION

STREAM 2

SESSION 2:
FUNDAMENTAL GEOMECHANICS

STREAM 3

SESSION 3:
FUNDAMENTAL GEOMECHANICS

Frédéric Amour,
Danish Offshore Technology Centre



Carbon storage in depleted Danish chalk reservoirs: characterising the shear and vertical deformation at the field scale and in the near-wellbore area

Chee Phuat Tan,
Petronas



Successful Pilot Deployment of Wellbore Strengthening Design Criteria and Quantification of Enhanced Fracture Gradient in a Depleted Reservoir in Malay Basin

Ahmed S. Alhawaj,
Saudi Aramco



Unravelling reservoir characteristics through integrative geomechanical approaches

Ikhwanul Hafizi Musa,
Petronas



Pragmatic Methodology for Evaluation of Geomechanical Risks During Feasibility Assessment of Fields in Offshore Peninsular Malaysia for CO2 Geological Storage

Lang Liu,
University of Alberta



Indication of In-situ Biaxial Stress from Pressuremeter Hold Test

Rafał Skupio,
Oil and Gas Institute – National Research Institute



Computed tomography and dynamic elastic parameters analysis of salt samples

Haizhu Wang,
China University of Petroleum



Effects of Heterogeneous Wettability on CO2/Oil Flow and Trapping Behavior in Porous Media: A Pore-Scale Simulation

Bruno Sergio Pimentel de Souza,
Petrobras



The temperature effect on fracture gradient in well containment analysis

Skaow Kusolsong,
PTTEP



UPVC test design, interpretation, and simulation for compaction and subsidence

Dave Davies,
Rockfield Global



Using ELFEN Horizon to assess geomechanical response of ExxonMobil’s GoM ST54 field due to CO2 injection

Abbas Khaksar,
Baker Hughes



Integrating Fibre Optic Surveys with Petrophysics and Geomechanics for Sand Control Decisions in a Brown Field

Shaikhah Zeer,
Saudi Aramco



Advanced performance evaluation of cement sheath

10:30
-11:50

STREAM 1

SESSION 1:
CO2 SEQUESTRATION & UTILIZATION

STREAM 2

SESSION 2:
FUNDAMENTAL GEOMECHANICS

STREAM 3

SESSION 3:
FUNDAMENTAL GEOMECHANICS

Frédéric Amour,
Danish Offshore Technology Centre



Carbon storage in depleted Danish chalk reservoirs: characterising the shear and vertical deformation at the field scale and in the near-wellbore area

Chee Phuat Tan,
Petronas



Successful Pilot Deployment of Wellbore Strengthening Design Criteria and Quantification of Enhanced Fracture Gradient in a Depleted Reservoir in Malay Basin

Ahmed S. Alhawaj,
Saudi Aramco



Unravelling reservoir characteristics through integrative geomechanical approaches

Ikhwanul Hafizi Musa,
Petronas



Pragmatic Methodology for Evaluation of Geomechanical Risks During Feasibility Assessment of Fields in Offshore Peninsular Malaysia for CO2 Geological Storage

Lang Liu,
University of Alberta



Indication of In-situ Biaxial Stress from Pressuremeter Hold Test

Rafał Skupio,
Oil and Gas Institute – National Research Institute



Computed tomography and dynamic elastic parameters analysis of salt samples

Haizhu Wang,
China University of Petroleum



Effects of Heterogeneous Wettability on CO2/Oil Flow and Trapping Behavior in Porous Media: A Pore-Scale Simulation

Bruno Sergio Pimentel de Souza,
Petrobras



The temperature effect on fracture gradient in well containment analysis

Skaow Kusolsong,
PTTEP



UPVC test design, interpretation, and simulation for compaction and subsidence

Dave Davies,
Rockfield Global



Using ELFEN Horizon to assess geomechanical response of ExxonMobil’s GoM ST54 field due to CO2 injection

Abbas Khaksar,
Baker Hughes



Integrating Fibre Optic Surveys with Petrophysics and Geomechanics for Sand Control Decisions in a Brown Field

Shaikhah Zeer,
Saudi Aramco



Advanced performance evaluation of cement sheath

11:50

– 12:50

LUNCH - 1 HR

11:50
-12:50

LUNCH - 1 HR

12:50

– 14:30

STREAM 1
 
SESSION 4:
GEOMECHANICS FOR GEOTHERMAL & NEW ENERGIES
 
STREAM 2
 
SESSION 5:
PETROLEUM GEOMECHANICS
 
STREAM 3
 
SESSION 6:
DRILLING GEOMECHANICS
 
Jawad Rafiq,
KFUPM
 
Unveiling the Potential Geothermal Reservoir in Al-Lith, Saudi Arabia: An Integrated Geologic, Remote Sensing, Geochemical, and Hydrochemical Approach
Sahriza Salwani Md Shah,
Petronas
 
Relationships between Tensile Strength, UCS and Porosity for Heterogeneous Porous Carbonate Rocks Based on Laboratory and Geomechanical Model Data
Mohamed Fouda,
Halliburton
 
Innovative Techniques for Wellbore Stability Evaluation Using Logging-While-Drilling Technologies
Daffa Arrofi,
KFUPM
 
Integrating Multiparameter Geological Remote Sensing Analysis to Delineate the Jizan Geothermal Reservoir, Southwestern Saudi Arabia
Ainash Shabdirova,
Nazarbayev University
 
Discrete element modelling of deep cemented sandstone formation using adhesive elasto-plastic contact model
Yousif M. B. Al-Asadi,
SLB
 
3D Near-Wellbore Geomechanical Modelling — Numerically Characterizing Borehole Stability
Yuedu Chen,
Taiyuan University of Technology
 
Thermal performance of a heterogeneous fracture in geothermal reservoirs caused by multi-wells alternating injection and production
Seyed Behzad Hosseinzadeh,
Technical University of Denmark
 
Impact of Thermo-Hydro-Mechanical-Chemical Coupling on Fluid Flow and Deformation during Water Injection in Chalk Reservoirs
Ahmed Bahgat,
EXCELLENCE LOGGING
 
Advanced Hole Cleaning Monitoring in Real-time Improves Drilling performance in Highly Deviated and Horizontal MRC (Maximum Reservoir Contact) Wells Drilled in the Lower Cretaceous Formations.
TBC

 
Izzati M Haata,
Petronas
 
Shale and Sand Pore Pressure Disequilibrium – challenges and mitigation strategy
Li Qiuguo,
Saudi Aramco
 
Poroelastic and Thermoelastic Considerations in Maximum Horizontal Stress Determination from Wellbore Failures
Jennifer Market,
GeoActive
 
Multi-Discipline Geomechanics Techniques: Sharing Best Practices Amongst Hydrocarbon, Mineral Mining, Geothermal, and CCUS Geoscientists
Nik Fadhlan,
Petronas
 
High Temperature influence in Pore Pressure Prediction – Case Study in Offshore Malaysia
Ivan Diaz-Granados,
SLB
 
How to make better decisions by capturing uncertainty in geomechanical wellbore models for drilling applications

12:50
-14:30

STREAM 1
 
SESSION 4:
GEOMECHANICS FOR GEOTHERMAL & NEW ENERGIES
 
STREAM 2
 
SESSION 5:
PETROLEUM GEOMECHANICS
 
STREAM 3
 
SESSION 6:
DRILLING GEOMECHANICS
 
Jawad Rafiq,
KFUPM
 
Unveiling the Potential Geothermal Reservoir in Al-Lith, Saudi Arabia: An Integrated Geologic, Remote Sensing, Geochemical, and Hydrochemical Approach
Sahriza Salwani Md Shah,
Petronas
 
Relationships between Tensile Strength, UCS and Porosity for Heterogeneous Porous Carbonate Rocks Based on Laboratory and Geomechanical Model Data
Mohamed Fouda,
Halliburton
 
Innovative Techniques for Wellbore Stability Evaluation Using Logging-While-Drilling Technologies
Daffa Arrofi,
KFUPM
 
Integrating Multiparameter Geological Remote Sensing Analysis to Delineate the Jizan Geothermal Reservoir, Southwestern Saudi Arabia
Ainash Shabdirova,
Nazarbayev University
 
Discrete element modelling of deep cemented sandstone formation using adhesive elasto-plastic contact model
Yousif M. B. Al-Asadi,
SLB
 
3D Near-Wellbore Geomechanical Modelling — Numerically Characterizing Borehole Stability
Yuedu Chen,
Taiyuan University of Technology
 
Thermal performance of a heterogeneous fracture in geothermal reservoirs caused by multi-wells alternating injection and production
Seyed Behzad Hosseinzadeh,
Technical University of Denmark
 
Impact of Thermo-Hydro-Mechanical-Chemical Coupling on Fluid Flow and Deformation during Water Injection in Chalk Reservoirs
Ahmed Bahgat,
EXCELLENCE LOGGING
 
Advanced Hole Cleaning Monitoring in Real-time Improves Drilling performance in Highly Deviated and Horizontal MRC (Maximum Reservoir Contact) Wells Drilled in the Lower Cretaceous Formations.
TBC

 
Izzati M Haata,
Petronas
 
Shale and Sand Pore Pressure Disequilibrium – challenges and mitigation strategy
Li Qiuguo,
Saudi Aramco
 
Poroelastic and Thermoelastic Considerations in Maximum Horizontal Stress Determination from Wellbore Failures
Jennifer Market,
GeoActive
 
Multi-Discipline Geomechanics Techniques: Sharing Best Practices Amongst Hydrocarbon, Mineral Mining, Geothermal, and CCUS Geoscientists
Nik Fadhlan,
Petronas
 
High Temperature influence in Pore Pressure Prediction – Case Study in Offshore Malaysia
Ivan Diaz-Granados,
SLB
 
How to make better decisions by capturing uncertainty in geomechanical wellbore models for drilling applications

14:30

– 14:40

COFFEE BREAK - 10 MIN

14:30
-14:40

COFFEE BREAK - 10 MIN

14:40

– 15:10

POSTER SESSION 1:
CO2 SEQUESTRATION & UTILIZATION
Akihisa Takahashi
 
Detection of Geomechanical Reservoir Deformation in CCS

Kun Su
 
Possible scenarios of CO2 injection through a thermal induced fracture predicted by an analytical mode

TBC
 

POSTER SESSION 2:
GEOMECHANICS FOR GEOTHERMAL & NEW ENERGIES
Aimene Aihar
 
Harnessing Geothermal Energy: The Emerging Role of Fishbone Drilling in EGS Development

Jerome Sfeir
 
Enhanced Geothermal Systems: A Sensitivity Analysis of Critical Performance Factors

Jiacheng Wang
 
Combining geothermal doublet system with aquifer thermal energy storage system

POSTER SESSION 3:
SUBSURFACE HYDROGEN AND ENERGY STORAGE
Rimsha Rais
 
Subsurface Hydrogen Storage in depleted wells of Balkasar, Filmkasar Fields, Upper Indus Basin, Pakistan.

Mustafa Sari
 
Petrophysical characterisation and geomechanical testing of rock slat as potential geostorage of hydrogen in Western Australia

Klemens Katterbauer
 
Deep learning uncertainty quantification approach for liquid hydrogen storage analysis

POSTER SESSION 4:
PETROLEUM GEOMECHANICS
Ruqaya Al Zadjali
 
Geomechanical Modelling to Assess Cap Rock Integrity for a Thermal EOR Development

Najwa Fayyaz
 
An integrated approach to Petroleum Geomechanics for 3D unconventional reservoir characterization, well integrity and hydraulic fracturing by using drilling operations, seismic modelling, paleo-stress fracture monitoring techniques in Potwar Plateau, NW Himalayas, Pakistan.

Mohammed Ali Saeed Ali
 
Ratio of Leak-off in Microfractures and Fluid Storage in Principal Fractures during Fracking Operations in Shale: An Eagle Ford Case Study

POSTER SESSION 5:
DRILLING GEOMECHANICS
Osman Hamid
 
Yielded zone characterization while drilling a wellbore into clastic reservoirs using elastoplastic modeling approaches

Yousif M. B. Al-Asadi
 
3D Near-Wellbore Geomechanical Modelling — Numerically Characterizing Borehole Stability

Mostafa Ahmed Mohamed Saleem
 
Enhancing Pressure Containment in Deepwater High-Pressure High-Temperature Drilling

POSTER SESSION 6:
STRUCTURE GEOMECHANICS
Muhammad Qureshi
 
Enhancing Fracture Characterization by Adopting Seismic and Geomechanical Restoration Approaches

Hui Wu
 
A low-dimensional parameterization method for discrete fracture networks based on Hough transform and autoencoder

Mohammed M. Al-Fahmi
 
Low fracture intensity in an anticline bisected by a mega strike-slip fault

14:40
-15:10

POSTER SESSION 1:
CO2 SEQUESTRATION & UTILIZATION
Akihisa Takahashi
 
Detection of Geomechanical Reservoir Deformation in CCS

Kun Su
 
Possible scenarios of CO2 injection through a thermal induced fracture predicted by an analytical mode

TBC
 

POSTER SESSION 2:
GEOMECHANICS FOR GEOTHERMAL & NEW ENERGIES
Aimene Aihar
 
Harnessing Geothermal Energy: The Emerging Role of Fishbone Drilling in EGS Development

Jerome Sfeir
 
Enhanced Geothermal Systems: A Sensitivity Analysis of Critical Performance Factors

Jiacheng Wang
 
Combining geothermal doublet system with aquifer thermal energy storage system

POSTER SESSION 3:
SUBSURFACE HYDROGEN AND ENERGY STORAGE
Rimsha Rais
 
Subsurface Hydrogen Storage in depleted wells of Balkasar, Filmkasar Fields, Upper Indus Basin, Pakistan.

Mustafa Sari
 
Petrophysical characterisation and geomechanical testing of rock slat as potential geostorage of hydrogen in Western Australia

Klemens Katterbauer
 
Deep learning uncertainty quantification approach for liquid hydrogen storage analysis

POSTER SESSION 4:
PETROLEUM GEOMECHANICS
Ruqaya Al Zadjali
 
Geomechanical Modelling to Assess Cap Rock Integrity for a Thermal EOR Development

Najwa Fayyaz
 
An integrated approach to Petroleum Geomechanics for 3D unconventional reservoir characterization, well integrity and hydraulic fracturing by using drilling operations, seismic modelling, paleo-stress fracture monitoring techniques in Potwar Plateau, NW Himalayas, Pakistan.

Mohammed Ali Saeed Ali
 
Ratio of Leak-off in Microfractures and Fluid Storage in Principal Fractures during Fracking Operations in Shale: An Eagle Ford Case Study

POSTER SESSION 5:
DRILLING GEOMECHANICS
Osman Hamid
 
Yielded zone characterization while drilling a wellbore into clastic reservoirs using elastoplastic modeling approaches

Yousif M. B. Al-Asadi
 
3D Near-Wellbore Geomechanical Modelling — Numerically Characterizing Borehole Stability

Mostafa Ahmed Mohamed Saleem
 
Enhancing Pressure Containment in Deepwater High-Pressure High-Temperature Drilling

POSTER SESSION 6:
STRUCTURE GEOMECHANICS
Muhammad Qureshi
 
Enhancing Fracture Characterization by Adopting Seismic and Geomechanical Restoration Approaches

Hui Wu
 
A low-dimensional parameterization method for discrete fracture networks based on Hough transform and autoencoder

Mohammed M. Al-Fahmi
 
Low fracture intensity in an anticline bisected by a mega strike-slip fault

15:10

– 16:50

STREAM 1

SESSION 7:
SUBSURFACE HYDROGEN AND ENERGY STORAGE

STREAM 2

SESSION 8:
STRUCTURE GEOMECHANICS

STREAM 3

SESSION 9:
DRILLING GEOMECHANICS

Matthias Brandt,
Institut fuer Gebirgsmechanik


Energy storage in salt caverns with supercritical and transcritical CO2

Mark Cottrell,
WSP-UK Ltd.


Enhancing and application of Terrestial Based DFN Workflow to Planetary Sciences

Thomas Finkbeiner,
KAUST


How geomechanics controls drillstring vibration induced wellbore damage

Pedro Vassalo Maia da Costa,
Modecom


Large-scale of hydrogen underground storage in salt caverns: the future of sustainable energy storage

Yaser Alzayer,
Saudi Aramco


Evidence of Strain Partitioning and Strike-Slip Reactivation during Late Cretaceous Folding in Eastern Arabia

Osman Hamid,
Saudi Aramco


Coupling Fluid Flow and Geomechanical Deformation Using AI & FEM Approaches

Julie Younes,
University of Toronto


Effect of H2 on Salt Caverns During Fast Cycling Injection-Production: Laboratory Characterization & Storage Integrity Workflow

Xu Yang,
Southwest Petroleum University


Quantitative Prediction of Tectonic Fractures in the Fourth Member of the Leikoupo Formation in the Pengzhou Area, Sichuan Basin

Tuhin Podder,
Baker Hughes


Proactive Application of Drilling Geomechanics on Well Planning Resulted in Efficient Well Delivery in Algeria: Planning vs. Implementation

Benoit Brouard,
Brouard Consulting


Geomechanical evaluation of an offshore salt cavern for hydrogen storage

Jingshou Liu,
China University of Geosciences


3-D heterogeneous geomechanics modeling and quantitative prediction of tectonic fractures in shale reservoirs

Adam Bere,
Rockfield Global


Wellbore Completion Integrity Under Extreme Levels of Fault Loading

Christoph Lüdeling,
IfG Institut für Gebirgsmechanik GmbH


Rock Salt Creep and Cavern Design

Jean Busson,
TotalEnergies


Caprock fault Permeability change with reactivation: Experimental review of operational constrains

Rima Al Faraj,
Saudi Aramco


SAGE-WSA and its applications in HPHT Formation

15:10
-16:50

STREAM 1

SESSION 7:
SUBSURFACE HYDROGEN AND ENERGY STORAGE

STREAM 2

SESSION 8:
STRUCTURE GEOMECHANICS

STREAM 3

SESSION 9:
DRILLING GEOMECHANICS

Matthias Brandt,
Institut fuer Gebirgsmechanik


Energy storage in salt caverns with supercritical and transcritical CO2

Mark Cottrell,
WSP-UK Ltd.


Enhancing and application of Terrestial Based DFN Workflow to Planetary Sciences

Thomas Finkbeiner,
KAUST


How geomechanics controls drillstring vibration induced wellbore damage

Pedro Vassalo Maia da Costa,
Modecom


Large-scale of hydrogen underground storage in salt caverns: the future of sustainable energy storage

Yaser Alzayer,
Saudi Aramco


Evidence of Strain Partitioning and Strike-Slip Reactivation during Late Cretaceous Folding in Eastern Arabia

Osman Hamid,
Saudi Aramco


Coupling Fluid Flow and Geomechanical Deformation Using AI & FEM Approaches

Julie Younes,
University of Toronto


Effect of H2 on Salt Caverns During Fast Cycling Injection-Production: Laboratory Characterization & Storage Integrity Workflow

Xu Yang,
Southwest Petroleum University


Quantitative Prediction of Tectonic Fractures in the Fourth Member of the Leikoupo Formation in the Pengzhou Area, Sichuan Basin

Tuhin Podder,
Baker Hughes


Proactive Application of Drilling Geomechanics on Well Planning Resulted in Efficient Well Delivery in Algeria: Planning vs. Implementation

Benoit Brouard,
Brouard Consulting


Geomechanical evaluation of an offshore salt cavern for hydrogen storage

Jingshou Liu,
China University of Geosciences


3-D heterogeneous geomechanics modeling and quantitative prediction of tectonic fractures in shale reservoirs

Adam Bere,
Rockfield Global


Wellbore Completion Integrity Under Extreme Levels of Fault Loading

Christoph Lüdeling,
IfG Institut für Gebirgsmechanik GmbH


Rock Salt Creep and Cavern Design

Jean Busson,
TotalEnergies


Caprock fault Permeability change with reactivation: Experimental review of operational constrains

Rima Al Faraj,
Saudi Aramco


SAGE-WSA and its applications in HPHT Formation

18:00

– 20:00

GALA DINNER, SPONSORED BY EXPEC ARC, SAUDI ARAMCO

18:00
-20:00

GALA DINNER, SPONSORED BY EXPEC ARC, SAUDI ARAMCO

DAY 3
1 November 2023, Wednesday

7:30

– 8:30

ONSITE REGISTRATION

7:30
-8:30

ONSITE REGISTRATION

8:30

– 8:50

OPENING SPEAKER:
Ismail Sulbi
Mining VP - Ma'aden

8:30
-8:50

OPENING SPEAKER:
Ismail Sulbi
Mining VP - Ma'aden

8:50

– 10:10

STREAM 1
 
SESSION 10:
MINING ROCK MECHANICS
 
STREAM 2
 
SESSION 11:
STRUCTURE GEOMECHANICS
 
STREAM 3
 
SESSION 12:
FUNDAMENTAL GEOMECHANICS
 
Jennifer Market,
GeoActive
 
The Role of Geomechanics in the Modern Exploration and Production Lifecycle: Hydrocarbons, Mining, and the Energy Transitio
TBC

 
Dee Moronkeji,
Apache
 
Present-day Stress Field of Western Desert of Egypt from Caliper and Image Logs
Afifah Azmi,
Petronas
 
Rare Earth Elements In-situ Leaching for Sustainable Energy Transition
Tuo Li,
Heibei University of Technology
 
A numerical equivalence approach of discrete fracture network based on fracture connectivity
Youcef Bouchachi,
Sonatrach
 
Present-day stress of Ahnet basin; a Dipole Shear Waves Anisotropy Approach
Abdelsalam N.A. Abugharara,
Memorial University of Newfoundland
 
Evaluation of Mining Ore Bodies Through Laboratory Core Characterization for Full-face Mining Recovery Optimization
Chun Liu,
PetroChina Hangzhou Research Institute of Geology
 
Effect of stress vertical zoning on reservoirs: An example from Kuqa foreland thrust belt, Tarim basin
Abhijit Mitra,
Premier Corex
 
Failure Characterization of Saturated Rock: Implication for Effective Stress Law
Ben Powlay,
University of Adelaide
 
Analysing “Real Time” Hydraulic Fracturing Effectiveness for increasing Caveability in Cave Mining using Monitoring techniques
Yang Hongwei,
Sun Yat-sen University
 
An indirect method to estimate Mode I fracture toughness of rocks by normal indentation tests considering size effect
Gustavo Meurer,
Petrobras
 
Lessons Learned in Salt Drilling Geomechanics at Brazilian Pre-salt in 20 years Experience

8:50
-10:10

STREAM 1
 
SESSION 10:
MINING ROCK MECHANICS
 
STREAM 2
 
SESSION 11:
STRUCTURE GEOMECHANICS
 
STREAM 3
 
SESSION 12:
FUNDAMENTAL GEOMECHANICS
 
Jennifer Market,
GeoActive
 
The Role of Geomechanics in the Modern Exploration and Production Lifecycle: Hydrocarbons, Mining, and the Energy Transitio
TBC

 
Dee Moronkeji,
Apache
 
Present-day Stress Field of Western Desert of Egypt from Caliper and Image Logs
Afifah Azmi,
Petronas
 
Rare Earth Elements In-situ Leaching for Sustainable Energy Transition
Tuo Li,
Heibei University of Technology
 
A numerical equivalence approach of discrete fracture network based on fracture connectivity
Youcef Bouchachi,
Sonatrach
 
Present-day stress of Ahnet basin; a Dipole Shear Waves Anisotropy Approach
Abdelsalam N.A. Abugharara,
Memorial University of Newfoundland
 
Evaluation of Mining Ore Bodies Through Laboratory Core Characterization for Full-face Mining Recovery Optimization
Chun Liu,
PetroChina Hangzhou Research Institute of Geology
 
Effect of stress vertical zoning on reservoirs: An example from Kuqa foreland thrust belt, Tarim basin
Abhijit Mitra,
Premier Corex
 
Failure Characterization of Saturated Rock: Implication for Effective Stress Law
Ben Powlay,
University of Adelaide
 
Analysing “Real Time” Hydraulic Fracturing Effectiveness for increasing Caveability in Cave Mining using Monitoring techniques
Yang Hongwei,
Sun Yat-sen University
 
An indirect method to estimate Mode I fracture toughness of rocks by normal indentation tests considering size effect
Gustavo Meurer,
Petrobras
 
Lessons Learned in Salt Drilling Geomechanics at Brazilian Pre-salt in 20 years Experience

10:10

– 10:20

COFFEE BREAK - 10 MIN

10:10
-10:20

COFFEE BREAK - 10 MIN

10:20

– 10:50

POSTER SESSION 7:
MACHINE LEARNING / AI
TBC
 
Jianguo Wang
 
Prediction of Reservoir Fracability Based on Machine Learning Ensemble Algorithm
Yiwei Chen
 
Carbonate formation pressure prediction method based on machine learning
POSTER SESSION 8:
CO2 SEQESTRATION AND UTILIZATION
Yihuai Zhang
 
The mechanical response during the CO2 storage in carbonate reservoir: an experimental study
Niccolò Menegoni
 
Fracture characterization of the Jizan Group from wellbore data and analog outcrop studies: implications for subsurface CO2 basalt mineralization
Satya Perumalla
 
Balancing Surface Facilities & Well Design to comply with Cap-rock Integrity in CCS Projects: Experience from UAE
POSTER SESSION 9:
FUNDAMENTAL GEOMECHANICS
Abhijit Mitra
 
The Influence of Strain Rate on Rock Strength and Stiffness
Mohammad Hossein Khosravi
 
Experimental investigation of undercut stratified rocks using base friction technique
Tao Pan
 
Advance prediction method of ROP based on Di-S2S
POSTER SESSION 10:
GEOMECHANICS FOR GEOTHERMAL & NEW ENERGIES
Demond Kauffman
 
Drilling Challenges and New Opportunities to Discover and Develop Geothermal Sector in the Middle East – Saudi Arabia: Jizan and Al Lith Area Case Studies
Elsa Maalouf
 
Subsurface Methane Migration through Degraded Cement and its Contribution to Climate Change
Elsa Maalouf
 
Experimental Investigation on the Influence of Operation and Formation Parameters on the Fracturing Fluid Flowback
POSTER SESSION 11:
PETROLEUM GEOMECHANICS
Bing Yang
 
The effect of stylolites on the p-wave properties of parent carbonate rock
Eman Alabdulmuhsin
 
Impact of Geology on Geomechanical modelling applications in Carbonate Reservoirs
Michał Kępiński
 
Optimising Drilling Efficiency: Unveiling the Significance of Wellbore Ballooning in Challenging Geological Conditions
POSTER SESSION 12:
DRILLING GEOMECHANICS
Abdelsalam N.A. Abugharara
  Laboratory Evaluation For Large Diameter Hole Optimal Drilling Performance
Klemens Katterbauer
 
A deep learning approach to evaluate formation damage in CO2 injection pressure transient analysis tests – a New Zealand aquifer analysis
M Rashad Amir Rashidi
 
CO2 core-flood injectivity and ultrasonic P velocities acquisitions in Sarawak Carbonates

10:20
-10:50

POSTER SESSION 7:
MACHINE LEARNING / AI
TBC
 
Jianguo Wang
 
Prediction of Reservoir Fracability Based on Machine Learning Ensemble Algorithm
Yiwei Chen
 
Carbonate formation pressure prediction method based on machine learning
POSTER SESSION 8:
CO2 SEQESTRATION AND UTILIZATION
Yihuai Zhang
 
The mechanical response during the CO2 storage in carbonate reservoir: an experimental study
Niccolò Menegoni
 
Fracture characterization of the Jizan Group from wellbore data and analog outcrop studies: implications for subsurface CO2 basalt mineralization
Satya Perumalla
 
Balancing Surface Facilities & Well Design to comply with Cap-rock Integrity in CCS Projects: Experience from UAE
POSTER SESSION 9:
FUNDAMENTAL GEOMECHANICS
Abhijit Mitra
 
The Influence of Strain Rate on Rock Strength and Stiffness
Mohammad Hossein Khosravi
 
Experimental investigation of undercut stratified rocks using base friction technique
Tao Pan
 
Advance prediction method of ROP based on Di-S2S
POSTER SESSION 10:
GEOMECHANICS FOR GEOTHERMAL & NEW ENERGIES
Demond Kauffman
 
Drilling Challenges and New Opportunities to Discover and Develop Geothermal Sector in the Middle East – Saudi Arabia: Jizan and Al Lith Area Case Studies
Elsa Maalouf
 
Subsurface Methane Migration through Degraded Cement and its Contribution to Climate Change
Elsa Maalouf
 
Experimental Investigation on the Influence of Operation and Formation Parameters on the Fracturing Fluid Flowback
POSTER SESSION 11:
PETROLEUM GEOMECHANICS
Bing Yang
 
The effect of stylolites on the p-wave properties of parent carbonate rock
Eman Alabdulmuhsin
 
Impact of Geology on Geomechanical modelling applications in Carbonate Reservoirs
Michał Kępiński
 
Optimising Drilling Efficiency: Unveiling the Significance of Wellbore Ballooning in Challenging Geological Conditions
POSTER SESSION 12:
DRILLING GEOMECHANICS
Abdelsalam N.A. Abugharara
  Laboratory Evaluation For Large Diameter Hole Optimal Drilling Performance
Klemens Katterbauer
 
A deep learning approach to evaluate formation damage in CO2 injection pressure transient analysis tests – a New Zealand aquifer analysis
M Rashad Amir Rashidi
 
CO2 core-flood injectivity and ultrasonic P velocities acquisitions in Sarawak Carbonates

10:50

– 12:10

STREAM 1
 
SESSION 13:
MINING ROCK MECHANICS
 
STREAM 2
 
SESSION 14:
CO2 SEQESTRATION AND UTILIZATION
 
STREAM 3
 
SESSION 15:
GEOMECHANICS FOR UNCONVENTIONALS
 
Mohammed Hefni,
King Abdulaziz University
 
Reinforcing cemented paste backfill with basalt fiber: A path towards sustainable practice in mine backfilling
Mustafa Sari,
CSIRO Energy
 
Implication of CO2 injection into calcite-cemented siliciclastic reservoir: Experimental observation during NMR-FBG core flooding assembly
Francis Elisabeth,
Saudi Aramco
 
State of the Art of Conventional vs. Unconventional Geomechanics Characterization
Bin Liu,
Shandong University
 
Seismic Forward-prospecting Methods for Adverse Geology in Tunnels
Jijun Miao,
SimTech LLC
 
Realtime CO2 Plume Monitoring and Optimization System through Coupling with Reservoir and Geophysical Calibration
Mohammed Ba Geri,
NewPark Drilling Fluids
 
Novel Fresh Water-Based Mud System in Highly Reactive Shale Formation: Experimental and Case Studies
Ruilin Yang,
Orica Limited
 
Integral system of monitoring and modeling for blast optimization
Dan Roberts,
Rockfield Global
 
Accounting for Stress History and Lithology in Geomechanical Models: Implications for Subsurface CO2 Storage Integrity on the Horda Platform
Eric van Oort,
The University of Texas at Austin
 
A New Confined Swelling Test for Improved Fluid-Shale Compatibility Evaluation
Xin Liu,
University of Science and Technology Liaoning
 
Energy based model with non-symmetrical branch fractures of different roughness
Haizhu Wang,
China University of Petroleum
 
Modelling and Verification of Transient Flow and Heat Transfer for CO2 Injection Wells — Application to CCUS Project at H3 Block, China
GRINI Charaf Eddine,
ENAGEO/SONATRACH
 
Borehole Stability Analysis For Frasnien Hot Shale Using 3D Seismic Geomechanical Modelling In One Of The Algerian Petroleum Field

10:50
-12:10

STREAM 1
 
SESSION 13:
MINING ROCK MECHANICS
 
STREAM 2
 
SESSION 14:
CO2 SEQESTRATION AND UTILIZATION
 
STREAM 3
 
SESSION 15:
GEOMECHANICS FOR UNCONVENTIONALS
 
Mohammed Hefni,
King Abdulaziz University
 
Reinforcing cemented paste backfill with basalt fiber: A path towards sustainable practice in mine backfilling
Mustafa Sari,
CSIRO Energy
 
Implication of CO2 injection into calcite-cemented siliciclastic reservoir: Experimental observation during NMR-FBG core flooding assembly
Francis Elisabeth,
Saudi Aramco
 
State of the Art of Conventional vs. Unconventional Geomechanics Characterization
Bin Liu,
Shandong University
 
Seismic Forward-prospecting Methods for Adverse Geology in Tunnels
Jijun Miao,
SimTech LLC
 
Realtime CO2 Plume Monitoring and Optimization System through Coupling with Reservoir and Geophysical Calibration
Mohammed Ba Geri,
NewPark Drilling Fluids
 
Novel Fresh Water-Based Mud System in Highly Reactive Shale Formation: Experimental and Case Studies
Ruilin Yang,
Orica Limited
 
Integral system of monitoring and modeling for blast optimization
Dan Roberts,
Rockfield Global
 
Accounting for Stress History and Lithology in Geomechanical Models: Implications for Subsurface CO2 Storage Integrity on the Horda Platform
Eric van Oort,
The University of Texas at Austin
 
A New Confined Swelling Test for Improved Fluid-Shale Compatibility Evaluation
Xin Liu,
University of Science and Technology Liaoning
 
Energy based model with non-symmetrical branch fractures of different roughness
Haizhu Wang,
China University of Petroleum
 
Modelling and Verification of Transient Flow and Heat Transfer for CO2 Injection Wells — Application to CCUS Project at H3 Block, China
GRINI Charaf Eddine,
ENAGEO/SONATRACH
 
Borehole Stability Analysis For Frasnien Hot Shale Using 3D Seismic Geomechanical Modelling In One Of The Algerian Petroleum Field

12:10

– 13:10

LUNCH - 1 HR

12:10
-13:10

LUNCH - 1 HR

13:10

– 14:50

STREAM 1

SESSION 16:
MINING ROCK MECHANICS

STREAM 2

SESSION 17:
CO2 SEQESTRATION AND UTILIZATION

STREAM 3

SESSION 18:
HYDRAULIC FRACTURING

Ahmed Alnuaim,
Ministry of Industry and Mineral


Resources
Geotechnical Characterization and Utilization of TBM Waste

Zhao Feng,
Tongji University


A deep-learning-based surrogate model for simulating coupled hydro-mechanical processes during geological CO2 sequestration

Ruud Weijermars,
KFUPM


Less is More: Sleek Solutions for Improving Hydraulic Fracturing Treatment Design and Well Performance

Mohammed Sazid,
King Abdulaziz University


Simulation of old surface and underground working for assessment of slope stability

Kanitthorn Adisornsupawat,
PTTEP


An assessment of wellbore integrity during the planned injection of CO2 within a depleted reservoir through numerical analyses

Mark McClure,
ResFrac Corporation


Effective Moduli Approximations to Capture the Effect of Anisotropy on Multistage Hydraulic Fracturing in Shale

Yuedu Chen,
Taiyuan University of Technology


Shear softening to hardening behaviors of coal structural plane after supercritical CO2 soaking: experiment and theoretical models

M Rashad Amir Rashidi,
Petronas Reasearch Sdn Bhd


Mechanical Properties Degradation in Depleted Clastic Reservoirs for CO2 Storage

Nawaf Abdulrahman A Alghamdi,
Saudi Aramco


A Hybrid Approach for Fracability Evaluation

Wang Chenghu,
National Institute of Natural Hazards, MEMC


Utilizing high-precision detecting methodology for comprehensive determination of stress fields for tunnelling engineering of Sichuan-Tibet Railway Project

Ali Mortazavi,
Nazarbayev University


Investigation of Faults Activation Mechanisms in Carbon (CO2) Storage

Liu Chun,
Nanjing University


The hydraulic fracturing simulation based on MatDEM

Wagdi Mohammed Hamid,
King Saud University


Utilization of Mine Tailings Based Geopolymer to Enhance the Bearing Capacity of Sabkha Soil

Muhammad Hamzi Yakup,
Petronas Reaserch Sdn Bhd


Evaluating Highly Porous and Depleted Carbonate Field for CO2 Storage Site Using A Novel Approach of Integrated Coupled Geomechanics-Dynamic Modelling

Xianghui Qin,
Chinese Academy of Geological Sciences


A novel method to obtain the shut-in pressure in the hydraulic fracturing test

13:10
-14:50

STREAM 1

SESSION 16:
MINING ROCK MECHANICS

STREAM 2

SESSION 17:
CO2 SEQESTRATION AND UTILIZATION

STREAM 3

SESSION 18:
HYDRAULIC FRACTURING

Ahmed Alnuaim,
Ministry of Industry and Mineral


Resources
Geotechnical Characterization and Utilization of TBM Waste

Zhao Feng,
Tongji University


A deep-learning-based surrogate model for simulating coupled hydro-mechanical processes during geological CO2 sequestration

Ruud Weijermars,
KFUPM


Less is More: Sleek Solutions for Improving Hydraulic Fracturing Treatment Design and Well Performance

Mohammed Sazid,
King Abdulaziz University


Simulation of old surface and underground working for assessment of slope stability

Kanitthorn Adisornsupawat,
PTTEP


An assessment of wellbore integrity during the planned injection of CO2 within a depleted reservoir through numerical analyses

Mark McClure,
ResFrac Corporation


Effective Moduli Approximations to Capture the Effect of Anisotropy on Multistage Hydraulic Fracturing in Shale

Yuedu Chen,
Taiyuan University of Technology


Shear softening to hardening behaviors of coal structural plane after supercritical CO2 soaking: experiment and theoretical models

M Rashad Amir Rashidi,
Petronas Reasearch Sdn Bhd


Mechanical Properties Degradation in Depleted Clastic Reservoirs for CO2 Storage

Nawaf Abdulrahman A Alghamdi,
Saudi Aramco


A Hybrid Approach for Fracability Evaluation

Wang Chenghu,
National Institute of Natural Hazards, MEMC


Utilizing high-precision detecting methodology for comprehensive determination of stress fields for tunnelling engineering of Sichuan-Tibet Railway Project

Ali Mortazavi,
Nazarbayev University


Investigation of Faults Activation Mechanisms in Carbon (CO2) Storage

Liu Chun,
Nanjing University


The hydraulic fracturing simulation based on MatDEM

Wagdi Mohammed Hamid,
King Saud University


Utilization of Mine Tailings Based Geopolymer to Enhance the Bearing Capacity of Sabkha Soil

Muhammad Hamzi Yakup,
Petronas Reaserch Sdn Bhd


Evaluating Highly Porous and Depleted Carbonate Field for CO2 Storage Site Using A Novel Approach of Integrated Coupled Geomechanics-Dynamic Modelling

Xianghui Qin,
Chinese Academy of Geological Sciences


A novel method to obtain the shut-in pressure in the hydraulic fracturing test

14:50

– 15:00

COFFEE BREAK - 10 MIN

14:50
-15:00

COFFEE BREAK - 10 MIN

15:00

– 15:50

POSTER SESSION 13:

MACHINE LEARNING / AI
Hamzah Al-Sharifi


Evaluation of different tree-based machine learning approaches for formation lithology classification

Osama Mutrif Siddig


Integrating Drilling Data And Machine Learning For Improved Rock Mechanics Prediction

Jijun Miao


Optimizing Refracturing Models in Tight Oil Reservoirs: An Integrated Workflow of Geology and Geomechanics Leveraging Artificial Intelligence

Ashraf Ahmed

White Box Artificial Neural Network Model for Real-Time Bulk Density Forecast

Zhongyu Hu


Fracture morphology evaluation of surrogate model for fast prediction using machine learning

POSTER SESSION 14:

FUNDAMENTAL GEOMECHANICS
Deheng Kong


Multiscale rock discontinuity roughness characterization using smartphone photogrammetry

Jianming Chen


Application and Estimation of Crack Density via Experimental Velocity Data

Dejian Li


Study on time-varying characteristics and prediction of acoustic emission of granite strainburst with initial temperature damage

Abubakar Isah


Effect of Geomechanical Properties on Rock Wetting Behavior

Bowen Zheng


Study on the anisotropy of shear fracture surface morphology for reservoir shale

POSTER SESSION 15:

HYDRAULIC FRACTURING
Kaiming Xia


Selecting Hydraulic Fracturing Method for Wells Landed in Deep and Tight Gas Reservoirs

Zhongyu Hu


Geomechanics analysis for high breakdown pressure of deep tight sandstone formation: A case study

Jianbin LI


Study on the mechanism of hydraulic fracture propagation in two sets of fracturecavity carbonate reservoirs

Su Wang


Experimental study on indoor multi-cluster fracturing based on distributed fibre-optical monitoring

Mao Sheng


Optimization of perforation parameters for shale gas horizontal wells in Weiyuan block, Sichuan Basin- A case study of well X1

POSTER SESSION 16:

CO2 SEQESTRATION AND UTILIZATION
Andika Perbawa


Monitoring Ultrasonic Velocity of Late Jurassic Carbonate Rocks Saturated by Brine and Supercritical CO2 using Coda Wave Analysis

TBC


Youheng Zhang

Numerical Simulation on Interaction between the Supercritical CO2 and Water-Rock in Tarim Basin

Masashi Kodama


Joint inversion of muography and seismic wave exploration

TBC


POSTER SESSION 17:

PETROLEUM GEOMECHANICS
Francis Elisabeth


Regional rock mechanics characterization of a tight sandstone with destructive/non-destructive measurements and artificial intelligence.

Ahmed Alharthi


A Cost-Effective Approach for Obtaining Geomechanics Data using Micro Rebound Hammer Test (MRT)

Sameeh I Batarseh


First Successful High Power Laser Descaling and Its Effect on Wellbore Stability

Zainab Al Ibrahim


Automatic Core to Log Depth Adjustment for Geomechanical Parameters Calibration

Wael El Sherbeny


Consequences Of Formation Petrophysical Characteristics on Both Wellbore Strengthening and Wellbore Stability: A Case Study, East Nile Delta, Egypt

POSTER SESSION 18:

DRILLING GEOMECHANICS
Satya Perumalla


Gaining the Trust of Drillers using Expert System powered by Geomechanics

Nanthakumar Rajaiah


Assessing failure criteria in carbonate reservoirs through geomechanics modeling of underbalance drilling

Osman Hamid


Solid Production Prediction in Weak Sandstone Formation Using Finite Element Modeling (FEM) Approaches

Ahmed Ali Alrashed


Modelling the Laser Penetration in Cased Hole Completions: Thermal & Mechanical Effects

Tianshou Ma


Physics-constrained distributed neural network model for 3D in-situ stress prediction

15:00
-15:50

POSTER SESSION 13:

MACHINE LEARNING / AI
Hamzah Al-Sharifi


Evaluation of different tree-based machine learning approaches for formation lithology classification

Osama Mutrif Siddig


Integrating Drilling Data And Machine Learning For Improved Rock Mechanics Prediction

Jijun Miao


Optimizing Refracturing Models in Tight Oil Reservoirs: An Integrated Workflow of Geology and Geomechanics Leveraging Artificial Intelligence

Ashraf Ahmed

White Box Artificial Neural Network Model for Real-Time Bulk Density Forecast

Zhongyu Hu


Fracture morphology evaluation of surrogate model for fast prediction using machine learning

POSTER SESSION 14:

FUNDAMENTAL GEOMECHANICS
Deheng Kong


Multiscale rock discontinuity roughness characterization using smartphone photogrammetry

Jianming Chen


Application and Estimation of Crack Density via Experimental Velocity Data

Dejian Li


Study on time-varying characteristics and prediction of acoustic emission of granite strainburst with initial temperature damage

Abubakar Isah


Effect of Geomechanical Properties on Rock Wetting Behavior

Bowen Zheng


Study on the anisotropy of shear fracture surface morphology for reservoir shale

POSTER SESSION 15:

HYDRAULIC FRACTURING
Kaiming Xia


Selecting Hydraulic Fracturing Method for Wells Landed in Deep and Tight Gas Reservoirs

Zhongyu Hu


Geomechanics analysis for high breakdown pressure of deep tight sandstone formation: A case study

Jianbin LI


Study on the mechanism of hydraulic fracture propagation in two sets of fracturecavity carbonate reservoirs

Su Wang


Experimental study on indoor multi-cluster fracturing based on distributed fibre-optical monitoring

Mao Sheng


Optimization of perforation parameters for shale gas horizontal wells in Weiyuan block, Sichuan Basin- A case study of well X1

POSTER SESSION 16:

CO2 SEQESTRATION AND UTILIZATION
Andika Perbawa


Monitoring Ultrasonic Velocity of Late Jurassic Carbonate Rocks Saturated by Brine and Supercritical CO2 using Coda Wave Analysis

TBC


Youheng Zhang

Numerical Simulation on Interaction between the Supercritical CO2 and Water-Rock in Tarim Basin

Masashi Kodama


Joint inversion of muography and seismic wave exploration

TBC


POSTER SESSION 17:

PETROLEUM GEOMECHANICS
Francis Elisabeth


Regional rock mechanics characterization of a tight sandstone with destructive/non-destructive measurements and artificial intelligence.

Ahmed Alharthi


A Cost-Effective Approach for Obtaining Geomechanics Data using Micro Rebound Hammer Test (MRT)

Sameeh I Batarseh


First Successful High Power Laser Descaling and Its Effect on Wellbore Stability

Zainab Al Ibrahim


Automatic Core to Log Depth Adjustment for Geomechanical Parameters Calibration

Wael El Sherbeny


Consequences Of Formation Petrophysical Characteristics on Both Wellbore Strengthening and Wellbore Stability: A Case Study, East Nile Delta, Egypt

POSTER SESSION 18:

DRILLING GEOMECHANICS
Satya Perumalla


Gaining the Trust of Drillers using Expert System powered by Geomechanics

Nanthakumar Rajaiah


Assessing failure criteria in carbonate reservoirs through geomechanics modeling of underbalance drilling

Osman Hamid


Solid Production Prediction in Weak Sandstone Formation Using Finite Element Modeling (FEM) Approaches

Ahmed Ali Alrashed


Modelling the Laser Penetration in Cased Hole Completions: Thermal & Mechanical Effects

Tianshou Ma


Physics-constrained distributed neural network model for 3D in-situ stress prediction

18:00

– 20:00

DINNER AT ITHRA, SPONSORED BY GAS DEVELOPMENT DEPARTMENT, SAUDI ARAMCO

18:00
-20:00

DINNER AT ITHRA, SPONSORED BY GAS DEVELOPMENT DEPARTMENT, SAUDI ARAMCO

DAY 4
2 November 2023, Thursday

7:30

– 8:30

ONSITE REGISTRATION

7:30
-8:30

ONSITE REGISTRATION

8:30

– 8:50

OPENING SPEAKER

8:30
-8:50

OPENING SPEAKER

8:50

– 10:10

STREAM 1

SESSION 19:
SUBSURFACE HYDROGEN AND ENERGY STORAGE

STREAM 2

SESSION 20:
CO2 SEQESTRATION AND UTILIZATION

STREAM 3

SESSION 21:
HYDRAULIC FRACTURING

Klemens Katterbauer,
Saudi Aramco


Distributed local sensor data optimization for hydrogen storage optimization utilizing a deep learning approach – a Taranaki basin investigation

Julian Guerra,
SLB


Derisking site selection for CO2 injection in UAE through geomechanics forward modeling

Adam Donald,
SLB


Anisotropic Elastic Constants for Stimulation Design using a novel machine learning aided inversion accounting for borehole fluid velocity

Anke Simone Wendt,
SLB


The Role of Integrated Geomechanics in the Energy Transition—Contributing to a Safer and Cleaner Environment

Juan Chavez,
AXIS


Developing Comprehensive Models of Completion and Formation Integrity During CO2 Injection into Depleted Reservoirs

Aflah Al Yaaribi,
PDO


Optimization of Hydraulic Stimulation Treatments of Tight Sandstone Gas Reservoirs in Oman with Geomechanical Sensitivity Analysis Using Analytical Simulation Techniques; A Case Study

TBC


Taher Sodager,
Saudi Aramco


Feasibility of Time-lapse seismic methods for monitoring CO2 storage in the Devonian Carbonate Reef

Peng Yang,
China University of Petroleum


Multi-well Pad Hydraulic Fracturing Modeling for Coupling 3D Fracture Propagation and Proppant Migration

Kan Wu,
Texas A&M University


Completion Design Evaluation based on Data Analysis of Distributed Fiber Optic Sensing

Talal Al Shafloot,
KFUPM


Experimental Evaluation of Frictional and Hydraulic Behavior of sc-CO2-saturated Fractures During Controlled Rate Slippage

Jijun Miao,
SimTech LLC


Dynamic 3D Hydraulic Fracture Propagation Considering the Influence of Horizontal Bedding Planes and Natural Fractures in Unconventional Reservoirs

8:50
-10:10

STREAM 1

SESSION 19:
SUBSURFACE HYDROGEN AND ENERGY STORAGE

STREAM 2

SESSION 20:
CO2 SEQESTRATION AND UTILIZATION

STREAM 3

SESSION 21:
HYDRAULIC FRACTURING

Klemens Katterbauer,
Saudi Aramco


Distributed local sensor data optimization for hydrogen storage optimization utilizing a deep learning approach – a Taranaki basin investigation

Julian Guerra,
SLB


Derisking site selection for CO2 injection in UAE through geomechanics forward modeling

Adam Donald,
SLB


Anisotropic Elastic Constants for Stimulation Design using a novel machine learning aided inversion accounting for borehole fluid velocity

Anke Simone Wendt,
SLB


The Role of Integrated Geomechanics in the Energy Transition—Contributing to a Safer and Cleaner Environment

Juan Chavez,
AXIS


Developing Comprehensive Models of Completion and Formation Integrity During CO2 Injection into Depleted Reservoirs

Aflah Al Yaaribi,
PDO


Optimization of Hydraulic Stimulation Treatments of Tight Sandstone Gas Reservoirs in Oman with Geomechanical Sensitivity Analysis Using Analytical Simulation Techniques; A Case Study

TBC


Taher Sodager,
Saudi Aramco


Feasibility of Time-lapse seismic methods for monitoring CO2 storage in the Devonian Carbonate Reef

Peng Yang,
China University of Petroleum


Multi-well Pad Hydraulic Fracturing Modeling for Coupling 3D Fracture Propagation and Proppant Migration

Kan Wu,
Texas A&M University


Completion Design Evaluation based on Data Analysis of Distributed Fiber Optic Sensing

Talal Al Shafloot,
KFUPM


Experimental Evaluation of Frictional and Hydraulic Behavior of sc-CO2-saturated Fractures During Controlled Rate Slippage

Jijun Miao,
SimTech LLC


Dynamic 3D Hydraulic Fracture Propagation Considering the Influence of Horizontal Bedding Planes and Natural Fractures in Unconventional Reservoirs

10:10

– 10:20

COFFEE BREAK - 10 MIN

10:10
-10:20

COFFEE BREAK - 10 MIN

10:20

– 10:50

POSTER SESSION 19:
STRUCTURE GEOMECHANICS
Osman Hamid
 
4D Geomechanical Modeling Application for Successful Drilling Operations

Haiyan Zhu
 
A FEM-DFN model for the interaction and propagation of multi-cluster fractures during variable fluid-viscosity injection in layered shale oil reservoir

Zhao Zexi
 
Application of time-varying frequency-divisional deconvolution to reservoir prediction in complex fault block areas

POSTER SESSION 20:
FUNDAMENTAL GEOMECHANICS
Michał Kępiński
 
Ductile behavior of anhydrites during multistage failure triaxial tests

Yiwei Chen
 
Modeling squirt dispersion and attenuation of ultrasonic in fluid-saturated rocks at the core scale

Mohammed Farfour
 
A new Quick Look Interpretation: Theory and Application

POSTER SESSION 21:
DRILLING GEOMECHANICS
Osman Hamid
 
D/3D Clustering Techniques of Geomechanical and Reservoir Properties to Overcome Stimulation Challenges

Wisam Alkawai
 
Lithology Identification using Drill Bit Sounds

Rached Rached
 
Numerical Tool for Multilateral Well Stability Analysis: FEM-Based Approach

POSTER SESSION 22:
MINING ROCK MECHANICS
Ben Powlay
 
The Application of Hydraulic Fracturing in Hard Rock Caving to Promote Caveability

GUO Yong-cheng
 
The analysis of unloading zone and rock quality evaluation in the Maya slope

Jili Feng
 
Investigation on prediction of mechanics parameters of engineering disturbed rock mass using resistivity exploration

POSTER SESSION 23:
HYDRAULIC FRACTURING
Tameem Almani
 
Predicting Formation Breakdown Pressures for Arbitrary Wellbore Orientation Using Machine Learning Techniques

Ahmed Ali Alrashed
 
Sensitivity of Stress Distribution to the Change in Rock’s Geomechancial Properties During Laser Heating

Sergey Stanchits
 
Parameters of granite Hydraulic Fracturing induced by waterless fluid injections
POSTER SESSION 24:
SUBSURFACE HYDROGEN AND NEW ENERGY
Osman Hamid
 
The Role of Geomechanics on Hydrogen Extraction

Ahmed Alsaffar
 
Impurity Measurement for Sustainable Hydrogen Fuel Utilizing Analytical Methods Based on ISO 21087:2019

Klemens Katterbauer
 
Enhancing recovery from natural hydrogen reservoirs – an AI-driven Logging while drilling optimization methodology

10:20
-10:50

POSTER SESSION 19:
STRUCTURE GEOMECHANICS
Osman Hamid
 
4D Geomechanical Modeling Application for Successful Drilling Operations

Haiyan Zhu
 
A FEM-DFN model for the interaction and propagation of multi-cluster fractures during variable fluid-viscosity injection in layered shale oil reservoir

Zhao Zexi
 
Application of time-varying frequency-divisional deconvolution to reservoir prediction in complex fault block areas

POSTER SESSION 20:
FUNDAMENTAL GEOMECHANICS
Michał Kępiński
 
Ductile behavior of anhydrites during multistage failure triaxial tests

Yiwei Chen
 
Modeling squirt dispersion and attenuation of ultrasonic in fluid-saturated rocks at the core scale

Mohammed Farfour
 
A new Quick Look Interpretation: Theory and Application

POSTER SESSION 21:
DRILLING GEOMECHANICS
Osman Hamid
 
D/3D Clustering Techniques of Geomechanical and Reservoir Properties to Overcome Stimulation Challenges

Wisam Alkawai
 
Lithology Identification using Drill Bit Sounds

Rached Rached
 
Numerical Tool for Multilateral Well Stability Analysis: FEM-Based Approach

POSTER SESSION 22:
MINING ROCK MECHANICS
Ben Powlay
 
The Application of Hydraulic Fracturing in Hard Rock Caving to Promote Caveability

GUO Yong-cheng
 
The analysis of unloading zone and rock quality evaluation in the Maya slope

Jili Feng
 
Investigation on prediction of mechanics parameters of engineering disturbed rock mass using resistivity exploration

POSTER SESSION 23:
HYDRAULIC FRACTURING
Tameem Almani
 
Predicting Formation Breakdown Pressures for Arbitrary Wellbore Orientation Using Machine Learning Techniques

Ahmed Ali Alrashed
 
Sensitivity of Stress Distribution to the Change in Rock’s Geomechancial Properties During Laser Heating

Sergey Stanchits
 
Parameters of granite Hydraulic Fracturing induced by waterless fluid injections
POSTER SESSION 24:
SUBSURFACE HYDROGEN AND NEW ENERGY
Osman Hamid
 
The Role of Geomechanics on Hydrogen Extraction

Ahmed Alsaffar
 
Impurity Measurement for Sustainable Hydrogen Fuel Utilizing Analytical Methods Based on ISO 21087:2019

Klemens Katterbauer
 
Enhancing recovery from natural hydrogen reservoirs – an AI-driven Logging while drilling optimization methodology

10:50

– 12:10

STREAM 1
 
SESSION 22:
GEOMECHANCIS FOR GEOTHERMAL & NEW ENERGIES
 
STREAM 2
 
SESSION 23:
CO2 SEQESTRATION AND UTILIZATION
 
STREAM 3
 
SESSION 24:
HYDRAULIC FRACTURING
 
Wael El Sherbeny,
Baker Hughes
 
Understandings of captured lessons-learned enhances learning curve of geothermal development and production, methodology & global Case Histories
Karsten Fischer,
SLB
 
Defining the impact of far-field stress uncertainty on the confidence of fault criticality analyses from 3D geomechanical simulations for CCS projectDefining the impact of far-field stress uncertainty on the confidence of fault criticality analyses from 3D geomechanical simulations for CCS projects
Johannes Vossen,
Baker Hughes
 
Geomechanical Analyses of Hydraulic Fracturing Efficiency and Challenges in a Tight Clastic Reservoir: Experiences over Years
Marc Hettema,
EBN
 
Maximum Earthquake Moment Magnitude Induced by Gas Depletion and Geothermal Injection: Similarities and Differences.
Kun SU,
TotalEnergies
 
Prediction of hydraulic and thermal induced fracture due to CO2 injection using equivalent inclusion method
Mohammed Hamed Salim AL-Aamri,
PDO
 
Mineralogical based Geomechanical model assisted hydraulic Fracture design for Fiber Optics well: Tested in a tight gas Sandstone reservoir
Yingchun Li,
Dalian University of Technology
 
Hydraulic fracturing for excavation-enhanced geothermal system (E-EGS): Review, opportunities and challenges
Jun Matsushima,
The University of Tokyo
 
Estimation of CO2 saturation and geomechanical parameters by combination of cosmic-ray muons and seismic exploration: Laboratory scale experiment
Haiyan Zhu,
Chengdu University of Technology
 
A new technology of combined network fracturing for shale oil reservoir in Jiyang Depression
Chun’an Tang,
Dalian University of Technology
 
Extraction-enhanced geothermal system: Strategic transformation from mineral mining to heat mining
Vlasios Leontidis,
IFP Energies nouvelles
 
Sensitivity of impurities to CO2 flow in injection wells
Ali Shawaf,
University of Wyoming
 
The Impact of Formation Anisotropy and Stresses on Fracture Geometry – A Case Study in Jafurah’s Tuwaiq Mountain Formation (TMF), Saudi Arabia

10:50
-12:10

STREAM 1
 
SESSION 22:
GEOMECHANCIS FOR GEOTHERMAL & NEW ENERGIES
 
STREAM 2
 
SESSION 23:
CO2 SEQESTRATION AND UTILIZATION
 
STREAM 3
 
SESSION 24:
HYDRAULIC FRACTURING
 
Wael El Sherbeny,
Baker Hughes
 
Understandings of captured lessons-learned enhances learning curve of geothermal development and production, methodology & global Case Histories
Karsten Fischer,
SLB
 
Defining the impact of far-field stress uncertainty on the confidence of fault criticality analyses from 3D geomechanical simulations for CCS projectDefining the impact of far-field stress uncertainty on the confidence of fault criticality analyses from 3D geomechanical simulations for CCS projects
Johannes Vossen,
Baker Hughes
 
Geomechanical Analyses of Hydraulic Fracturing Efficiency and Challenges in a Tight Clastic Reservoir: Experiences over Years
Marc Hettema,
EBN
 
Maximum Earthquake Moment Magnitude Induced by Gas Depletion and Geothermal Injection: Similarities and Differences.
Kun SU,
TotalEnergies
 
Prediction of hydraulic and thermal induced fracture due to CO2 injection using equivalent inclusion method
Mohammed Hamed Salim AL-Aamri,
PDO
 
Mineralogical based Geomechanical model assisted hydraulic Fracture design for Fiber Optics well: Tested in a tight gas Sandstone reservoir
Yingchun Li,
Dalian University of Technology
 
Hydraulic fracturing for excavation-enhanced geothermal system (E-EGS): Review, opportunities and challenges
Jun Matsushima,
The University of Tokyo
 
Estimation of CO2 saturation and geomechanical parameters by combination of cosmic-ray muons and seismic exploration: Laboratory scale experiment
Haiyan Zhu,
Chengdu University of Technology
 
A new technology of combined network fracturing for shale oil reservoir in Jiyang Depression
Chun’an Tang,
Dalian University of Technology
 
Extraction-enhanced geothermal system: Strategic transformation from mineral mining to heat mining
Vlasios Leontidis,
IFP Energies nouvelles
 
Sensitivity of impurities to CO2 flow in injection wells
Ali Shawaf,
University of Wyoming
 
The Impact of Formation Anisotropy and Stresses on Fracture Geometry – A Case Study in Jafurah’s Tuwaiq Mountain Formation (TMF), Saudi Arabia

12:10

– 13:10

LUNCH - 1 HR

12:10
-13:10

LUNCH - 1 HR

13:10

– 14:50

STREAM 1
 
SESSION 25:
INTEGRATED CASE STUDIES
 
STREAM 2
 
SESSION 26:
CO2 SEQESTRATION AND UTILIZATION
 
STREAM 3
 
SESSION 27:
HYDRAULIC FRACTURING
 
Ting Huang,
Changqing Oil Field Company
 
The technology of development regime transformation in super-low permeability oil reservoir to significantly improve recovery efficiency: case study in HQ oilfield, Ordos Basin, China
Enyi YU,
Peking University
 
In-situ stress simulation and analysis during CO2 geological storage
Andrey Bakulin,
Saudi Aramco
 
TBC
Michał Kępiński,
PGNiG
 
Stress profiling within fault-and-thrust-belt considering a structural strain: the case of a deep borehole in the Outer Carpathians (Poland)
Svetlana Zhigulskiy,
Gazpromneft Science and Technology Centre
 
Two-way coupling simulation and geomechanical modelling of fault activation related to Carbon Capture and Storage
Xuanhe Tang,
Chengdu University of Technology
 
Complex well-interferences during multi-wells hydraulic fracturing in Weirong deep shale gas reservoir
Souvik Sen,
Baker Hughes
 
Characterization of Maximum Horizontal Stress from wellbore failures – A case study from the tight Paleozoic Hamra Quartzite oil reservoir of Oued Mya Basin, Algeria
Takumi Onuma,
University of Tokyo
 
A Consideration on Key Reservoir Parameter for Surface Displacement at CCS/CCUS Sites
Bo Zheng,
Chinese Academy of Sciences
 
Investigation on the geomechanical parameters distribution and the hydraulic fracturing processes of the Lucaogou shale oil reservoirs
Ersi Xu,
PetroChina Southwest Oil & Gas Field Company
 
A Comprehensive Evaluation of Diagnostic Fracture Injection Testing for Shale Gas Horizontal Wells in Southern Sichuan Basin, China
Sahriza Salwani Md Shah,
PETRONAS Research Sdn Bhd
 
Impact of CO2 and H2S exposure on tensile strength of carbonate rock for CO2 storage evaluation
Haoyong Huang,
PetroChina Southwest Oil & Gas Field Company
 
A Geomechanics Model-Driven solutions On Frac Hits And Casing Deformation In Ultradeep Shale Hydraulic Fracturing
Ruqaya Al Zadjali,
PDO
 
Geomechanical Integration Maximizes the Value for polymer full field decision for Clastic Reservoir field in South of Oman
Muhammad Hamzi Yakup,
PETRONAS
 
CO2 Thermal Behaviour and Associated Geomechanics Risks Evaluations for the First Malaysian Offshore CCS Project Utilizing Full Field And Near Wellbore Thermal Modelling Approaches
Tao You,
Hohai University
 
On poroelastic strain energy degradation in the variational phase-field models for hydraulic fracture in oil or gas shale

13:10
-14:50

STREAM 1
 
SESSION 25:
INTEGRATED CASE STUDIES
 
STREAM 2
 
SESSION 26:
CO2 SEQESTRATION AND UTILIZATION
 
STREAM 3
 
SESSION 27:
HYDRAULIC FRACTURING
 
Ting Huang,
Changqing Oil Field Company
 
The technology of development regime transformation in super-low permeability oil reservoir to significantly improve recovery efficiency: case study in HQ oilfield, Ordos Basin, China
Enyi YU,
Peking University
 
In-situ stress simulation and analysis during CO2 geological storage
Andrey Bakulin,
Saudi Aramco
 
TBC
Michał Kępiński,
PGNiG
 
Stress profiling within fault-and-thrust-belt considering a structural strain: the case of a deep borehole in the Outer Carpathians (Poland)
Svetlana Zhigulskiy,
Gazpromneft Science and Technology Centre
 
Two-way coupling simulation and geomechanical modelling of fault activation related to Carbon Capture and Storage
Xuanhe Tang,
Chengdu University of Technology
 
Complex well-interferences during multi-wells hydraulic fracturing in Weirong deep shale gas reservoir
Souvik Sen,
Baker Hughes
 
Characterization of Maximum Horizontal Stress from wellbore failures – A case study from the tight Paleozoic Hamra Quartzite oil reservoir of Oued Mya Basin, Algeria
Takumi Onuma,
University of Tokyo
 
A Consideration on Key Reservoir Parameter for Surface Displacement at CCS/CCUS Sites
Bo Zheng,
Chinese Academy of Sciences
 
Investigation on the geomechanical parameters distribution and the hydraulic fracturing processes of the Lucaogou shale oil reservoirs
Ersi Xu,
PetroChina Southwest Oil & Gas Field Company
 
A Comprehensive Evaluation of Diagnostic Fracture Injection Testing for Shale Gas Horizontal Wells in Southern Sichuan Basin, China
Sahriza Salwani Md Shah,
PETRONAS Research Sdn Bhd
 
Impact of CO2 and H2S exposure on tensile strength of carbonate rock for CO2 storage evaluation
Haoyong Huang,
PetroChina Southwest Oil & Gas Field Company
 
A Geomechanics Model-Driven solutions On Frac Hits And Casing Deformation In Ultradeep Shale Hydraulic Fracturing
Ruqaya Al Zadjali,
PDO
 
Geomechanical Integration Maximizes the Value for polymer full field decision for Clastic Reservoir field in South of Oman
Muhammad Hamzi Yakup,
PETRONAS
 
CO2 Thermal Behaviour and Associated Geomechanics Risks Evaluations for the First Malaysian Offshore CCS Project Utilizing Full Field And Near Wellbore Thermal Modelling Approaches
Tao You,
Hohai University
 
On poroelastic strain energy degradation in the variational phase-field models for hydraulic fracture in oil or gas shale

14:50

– 15:00

COFFEE BREAK - 10 MIN

14:50
-15:00

COFFEE BREAK - 10 MIN

15:00

– 15:50

POSTER SESSION 25:

STRUCTURE GEOMECHANICS
Aly Abdelaziz


3D visualization of a complex fracture network formed by true-triaxial testing

Lejia Ren


Experiments and analysis on different mineral fabric shale fracturing by a CT visualized multi-functional experimental equipment

Mohammed Alhaqbani


Integrating Fully 3D fracture Models and PLT to Evaluate Stress Shadow Effect on Hydraulic Fracture Growth and Production Flow Profile for Tight Sand Reservoirs

Songfeng Guo


Stress Disturbance around Xianshuihe Fault Zone and Implication for Fault Stability and Tectonic Dynamics

Kareem Ramzy Aboayanah


Investigating Thermal Gradient Cracking and Fracture Process Zone Development in Granitic Rocks

POSTER SESSION 26:

GEOMECHANICS FOR UNCONVENTIONALS
TBC


LI Yuqi


Model of Fractured Horizontal Wells in Shale Oil Reservoirs with Bedding Fractures Considered

Eduardo Gramajo Silva


Characterization and Index Measurements of the Unconventional Qusaiba Rock Member from Qassim Region, Saudi Arabia

Guangfu Zhang


Study on Temperature Field during Drilling and Temperature Reduction by Mud Density Reduction Technology in Deep Shale Gas Well

Jian Xiong


A new method for fracability evaluation of deep continental shale oil reservoirs

POSTER SESSION 27:

PETROLEUM GEOMECHANICS
Reynaldi Mikhael Chrislianto


Sand Production Prediction for an Offshore Well with a Shallow Unconsolidated Reservoir Zone, Mako Gas Field, Natuna Sea, Indonesia

Deng Fucheng


Study on Sand Production Mechanism of Fractured Reservoir in Dina Gas Field

Abinash Bal


Transition from Poroelastic to Fluid Dynamic Effect: Understanding Fluid Flow Behaviour in Depleted Shale Gas Reservoirs

Elyar Kavosian


Analysis of time dependent of a problematic zone in an oil well

Hemant Singh


Deepwater Field Development Decision- You Must Consider Geomechanical Risks

POSTER SESSION 28:

INTEGRATED CASE STUDIES
Prajit Chakrabarti


Integration of 1-D geomechanical model for Minimum Horizontal Stress Estimation and validation with micro-frac tests – cases study from Touggourt field


Algeria

Jianguo Wang


Comparative Analysis and Optimization of Supercritical CO2 and H2O Performances in Enhanced Geothermal System: A Case Study in the Gonghe Basin

Yueqiang Ma


Influence of stress transfer on triggering fault instability in a double faults enhanced geothermal system

TBC


Araceli Martinez Pacheco


Digital Enablement of Dynamic Risk Management to Drive Operational Efficiency through a Real-Time International Operations Integrity Center

POSTER SESSION 29:

HYDRAULIC FRACKING
Tameem Almani


Sensitivity Analysis of the Factors Affecting Formation Breakdown Pressure Using a Computational-Based Approach

Ali Oshaish


Fracture Propagation-Rate and Fracture Half-Length Estimation for Individual Fracturing Stage through Dynamic Balancing of Fluid Pressures: Eagle Ford Case Study

TBC


Yazeed Altowairqi


The integration of microseismic applications with advanced seismic interpretation tools: a new workflow for frack design optimization and sweet spotting

Jinzhi Mou


Mechanism of Near wellbore Fracture Initiation during Hydraulic Fracturing of Horizontal Wells with In-plane perforation

POSTER SESSION 30:

INTEGRATED STUDIES
TBC


Abdullah Alghamdi


Modelling the effect of seismic scale faults on intra-formational strain within reservoir rocks

Abbas Khaksar


Validation of Geomechanical Sanding Predictions with Subsequent Production and Water Injection in a Rejuvenated Oil Field, Offshore Malaysia

TBC


Muhammad Qureshi


A novel AI technique to decipher subsurface fault complexity, method to reveal concealed faults

15:00
-15:50

POSTER SESSION 25:

STRUCTURE GEOMECHANICS
Aly Abdelaziz


3D visualization of a complex fracture network formed by true-triaxial testing

Lejia Ren


Experiments and analysis on different mineral fabric shale fracturing by a CT visualized multi-functional experimental equipment

Mohammed Alhaqbani


Integrating Fully 3D fracture Models and PLT to Evaluate Stress Shadow Effect on Hydraulic Fracture Growth and Production Flow Profile for Tight Sand Reservoirs

Songfeng Guo


Stress Disturbance around Xianshuihe Fault Zone and Implication for Fault Stability and Tectonic Dynamics

Kareem Ramzy Aboayanah


Investigating Thermal Gradient Cracking and Fracture Process Zone Development in Granitic Rocks

POSTER SESSION 26:

GEOMECHANICS FOR UNCONVENTIONALS
TBC


LI Yuqi


Model of Fractured Horizontal Wells in Shale Oil Reservoirs with Bedding Fractures Considered

Eduardo Gramajo Silva


Characterization and Index Measurements of the Unconventional Qusaiba Rock Member from Qassim Region, Saudi Arabia

Guangfu Zhang


Study on Temperature Field during Drilling and Temperature Reduction by Mud Density Reduction Technology in Deep Shale Gas Well

Jian Xiong


A new method for fracability evaluation of deep continental shale oil reservoirs

POSTER SESSION 27:

PETROLEUM GEOMECHANICS
Reynaldi Mikhael Chrislianto


Sand Production Prediction for an Offshore Well with a Shallow Unconsolidated Reservoir Zone, Mako Gas Field, Natuna Sea, Indonesia

Deng Fucheng


Study on Sand Production Mechanism of Fractured Reservoir in Dina Gas Field

Abinash Bal


Transition from Poroelastic to Fluid Dynamic Effect: Understanding Fluid Flow Behaviour in Depleted Shale Gas Reservoirs

Elyar Kavosian


Analysis of time dependent of a problematic zone in an oil well

Hemant Singh


Deepwater Field Development Decision- You Must Consider Geomechanical Risks

POSTER SESSION 28:

INTEGRATED CASE STUDIES
Prajit Chakrabarti


Integration of 1-D geomechanical model for Minimum Horizontal Stress Estimation and validation with micro-frac tests – cases study from Touggourt field


Algeria

Jianguo Wang


Comparative Analysis and Optimization of Supercritical CO2 and H2O Performances in Enhanced Geothermal System: A Case Study in the Gonghe Basin

Yueqiang Ma


Influence of stress transfer on triggering fault instability in a double faults enhanced geothermal system

TBC


Araceli Martinez Pacheco


Digital Enablement of Dynamic Risk Management to Drive Operational Efficiency through a Real-Time International Operations Integrity Center

POSTER SESSION 29:

HYDRAULIC FRACKING
Tameem Almani


Sensitivity Analysis of the Factors Affecting Formation Breakdown Pressure Using a Computational-Based Approach

Ali Oshaish


Fracture Propagation-Rate and Fracture Half-Length Estimation for Individual Fracturing Stage through Dynamic Balancing of Fluid Pressures: Eagle Ford Case Study

TBC


Yazeed Altowairqi


The integration of microseismic applications with advanced seismic interpretation tools: a new workflow for frack design optimization and sweet spotting

Jinzhi Mou


Mechanism of Near wellbore Fracture Initiation during Hydraulic Fracturing of Horizontal Wells with In-plane perforation

POSTER SESSION 30:

INTEGRATED STUDIES
TBC


Abdullah Alghamdi


Modelling the effect of seismic scale faults on intra-formational strain within reservoir rocks

Abbas Khaksar


Validation of Geomechanical Sanding Predictions with Subsequent Production and Water Injection in a Rejuvenated Oil Field, Offshore Malaysia

TBC


Muhammad Qureshi


A novel AI technique to decipher subsurface fault complexity, method to reveal concealed faults

15:50

– 16:10

SYMPOSIUM CLOSING - 20 MIN

15:50
-16:10

SYMPOSIUM CLOSING - 20 MIN